No matter the climate, location, or type of building, whether your roof is tile, flat, or metal, it will always require some roof maintenance in Cambridge.
While some will likely require more than others, commercial roofing contractors in Cambridge share that roof maintenance is common, and checkups are often highly recommended to extend the life of your roof, regardless of the type of material it is made of. Here are some useful tips for any home or business owner to use when maintaining their roof.
Tile roof maintenance in Cambridge
One tip applies to all types of roofs: clean anything we find on it and, of course, all the debris on the roof, whenever possible. Clearing debris exposes any tears, punctures, or general damage to your roof and prevents large objects like tree branches from scratching your roof material. Whether it is asphalt shingles, PVC membrane, or even metal panels, scratches will reduce the durability of all types to varying degrees.
Focused roof maintenance in Cambridge
Not all roof types require the same level of maintenance. In these cases, we recommend consulting with a roof maintenance specialist to obtain the best possible advice when maintaining our roof.
Metal panel roof maintenance
Bubbling is a sure sign of trouble when it comes to rubber roofs or flat roofs with a PVC membrane installed. Flat roofs will have sections of their membrane raised and swollen due to a few reasons. One of the reasons may be poor insulation of the buildings or a tear in the membrane that causes it to fill with water or air. These cases can arise either due to poor installation or harmful residue. If you notice bubbles occurring on your roof when checking your roof, it is highly recommended that you contact a roof treatment expert for a proper inspection. Appropriate patches and welds will be applied where necessary, and everything will be handled.
Flat roof maintenance in Cambridge
Large scratches or dents caused by fallen debris can lead to eventual rust and thus deteriorate the protection of your metal panels. If the scratch is light enough, and depending on the type of metal, resealing the waterproof layer will be sufficient to repair its functionality. However, large joints or small holes could require welding new metal or even installing new panels. To ensure and carry out a correct repair, it is recommended that you consult with your roof recovery and rehabilitation expert. This way, you will be calmer and more confident that a qualified professional has done the job well.
Tips to make a steel roof last longer
On average, the useful life of a steel roof is approximately 40 to 60 years, which is one of the main advantages as a coating and/or covering product.
Commercial roofing contractors in Cambridge explain why its initial cost is higher compared to other materials since its longevity justifies this investment. However, some problems could compromise this longevity and result in material replacement sooner than planned.
Proper installation of steel panels:
The materials often need to be fixed due to errors made during installation. And although sometimes these are simple, such as not tightening the screws correctly or using an inadequate sealant, we consider it essential to hire an expert in this type of installation who has sufficient experience. Depending on the type of panel used, metal roof installations require different skills and tools than other types of roof installations.
Choosing a steel roof suitable for the climate where the property is located:
Very adverse weather conditions, such as strong wind or heavy snowfall, can affect any roof, not just steel ones. Steel is a strong material that can withstand winds up to 200 km/hr. Still, if your area has strong wind or storms, you'll want to do an inspection later.
Depending on the extreme weather, there are particular areas you should check:
·
· Snowstorm: check dust covers, gaskets, and gutters. If you have snow guards, make sure they are not damaged.
· High winds: Check for damage from fallen branches and loose or missing dust covers and gaskets.
· Hail storm: Check for loose fasteners, damage to boots and gaskets, and dents.
· In areas with milder weather conditions, you have more flexibility with the type of steel roof you choose.
If you live within 2 kilometers of the sea, you should choose a steel roofing material compatible with the salty air in coastal areas. Otherwise, your roof will rust and fail prematurely.
Roof maintenance with metal panels
Finally, commercial roofing contractors in Cambridge focus on metal roofs. The most common types of metal roofs consist of standing seam metal panels or barn metal sheets. Unlike the two materials mentioned above, metal roofs are much more durable compared to these. However, even if you don't have to worry about bubbles or loose panels, debris damage is still dangerous for metal roof owners to be aware of.
You must be logged in to post a comment.